Deluxe Fordor – Roof & Drip Mouldings

Front view showing the typical roof mouldings used on fordor models (excluding 60-A,B,C) and 1930-31 coupes, until May 1931. The front moulding is the 5/8″ center closing type that conceals the nails. The sides and rear moulding is aluminum with exposed nails. This was used alternatively with a center closing type on all bodies mentioned.

Another view of the front moulding showing the slight clearance from the drip moulding. Note the #6 slotted wood screw securing the front of the drip moulding. This was typical of two piece drip mouldings when no finishing tip was used.

A close-up view of showing the rear of the drip moulding. The finishing tip used was also used on the Town Car.

Use the Back button on your browser or click on the arrow to return.